Understanding the Procedure for Porcelain Veneers

We’ve written about the various benefits of porcelain veneers for your teeth, so today we’ll be going in depth regarding the step by step process of having porcelain veneers put in place. In case you missed our other post, porcelain veneers (also sometimes called dental veneers or dental porcelain laminates) are a very thin custom-made covering that goes over the front of your teeth.

Typically made out of porcelain or resin composite materials, porcelain tends to be the material of choice as it better matches the natural light reflecting properties of your teeth while also being more resistant to stains.

When Should you get Porcelain Veneers?

Most often porcelain veneers are typically used to help cover discoloured teeth, either because of other dental procedures like root-canal treatment or because of stains from excessive fluoride and other materials. Porcelain veneers Warrington experts also perform the procedure to help cover teeth that are worn down, chipped or have any other irregularities.  

The Main Steps in the Porcelain Veneers Warrington Procedure

  1. Trimming – The procedure begins with the enamel on the front of your tooth being shaved back for approximately the same thickness as the veneer set to be placed.
  2. Determining the shade – The next step is to look at which shade of veneer will best complement and match your natural tooth colour.
  3. Making a Mould – After trimming and determining the shade, porcelain veneers Warrington then make a mould of your newly shaved teeth in order to create your veneer perfectly to fit.
  4. Temporary Veneer – After this step, some dentists might place a temporary veneer if a large amount of enamel has been shaved away. Typically, a temporary veneer won’t be used unless absolutely necessary.
  5. Pre-Bonding Evaluation – Once your veneer is made you’ll come in to check the fit, shape and colour of your veneer with non-bonding trial paste. After this your porcelain veneers Warrington specialist will make any final changes.
  6. Bonding the Veneer – At this point, your dentist will place an acid etching gel on your tooth upon which they’ll lay down the bonding paste. The veneer is placed and positioned and then a “curing” light is used to help the paste set within a couple of minutes.
  7. Clean-up and Follow-up – After this, the dentist just need to clean off any excess bonding paste and book a follow-up appointment to look at how your gums have responded to the presence of your new veneers.

What Should I know Before Getting Porcelain Veneers?

It’s important to know that the process of getting porcelain veneers isn’t reversible and are usually not repairable if they chip or crack. Be aware that because you’ve had some enamel trimmed off, your teeth might be slightly more sensitive to hot and cold foods or beverages. Lastly, porcelain veneers typically last between seven to fifteen years, after you’ll need to visit porcelain veneers Warrington specialist to get them replaced.

Where Should I get Porcelain Veneers Near Warrington?

If you’re looking for a professional and expert dental service to either place or replace porcelain veneers near the Warrington area, Jones Dental Care have been providing exceptional dental care and porcelain veneers since 2002. Give us a call or fill out our contact form today for more information.

Understanding the Procedure for Porcelain Veneers

We’ve written about the various benefits of porcelain veneers for your teeth, so today we’ll be going in depth regarding the step by step process of having porcelain veneers put in place. In case you missed our other post, porcelain veneers (also sometimes called dental veneers or dental porcelain laminates) are a very thin custom-made covering that goes over the front of your teeth.

Typically made out of porcelain or resin composite materials, porcelain tends to be the material of choice as it better matches the natural light reflecting properties of your teeth while also being more resistant to stains.

When Should you get Porcelain Veneers?

Most often porcelain veneers are typically used to help cover discoloured teeth, either because of other dental procedures like root-canal treatment or because of stains from excessive fluoride and other materials. Porcelain veneers Warrington experts also perform the procedure to help cover teeth that are worn down, chipped or have any other irregularities.  

The Main Steps in the Porcelain Veneers Warrington Procedure

  1. Trimming – The procedure begins with the enamel on the front of your tooth being shaved back for approximately the same thickness as the veneer set to be placed.
  2. Determining the shade – The next step is to look at which shade of veneer will best complement and match your natural tooth colour.
  3. Making a Mould – After trimming and determining the shade, porcelain veneers Warrington then make a mould of your newly shaved teeth in order to create your veneer perfectly to fit.
  4. Temporary Veneer – After this step, some dentists might place a temporary veneer if a large amount of enamel has been shaved away. Typically, a temporary veneer won’t be used unless absolutely necessary.
  5. Pre-Bonding Evaluation – Once your veneer is made you’ll come in to check the fit, shape and colour of your veneer with non-bonding trial paste. After this your porcelain veneers Warrington specialist will make any final changes.
  6. Bonding the Veneer – At this point, your dentist will place an acid etching gel on your tooth upon which they’ll lay down the bonding paste. The veneer is placed and positioned and then a “curing” light is used to help the paste set within a couple of minutes.
  7. Clean-up and Follow-up – After this, the dentist just need to clean off any excess bonding paste and book a follow-up appointment to look at how your gums have responded to the presence of your new veneers.

What Should I know Before Getting Porcelain Veneers?

It’s important to know that the process of getting porcelain veneers isn’t reversible and are usually not repairable if they chip or crack. Be aware that because you’ve had some enamel trimmed off, your teeth might be slightly more sensitive to hot and cold foods or beverages. Lastly, porcelain veneers typically last between seven to fifteen years, after you’ll need to visit porcelain veneers Warrington specialist to get them replaced.

Where Should I get Porcelain Veneers Near Warrington?

If you’re looking for a professional and expert dental service to either place or replace porcelain veneers near the Warrington area, Jones Dental Care have been providing exceptional dental care and porcelain veneers since 2002. Give us a call or fill out our contact form today for more information.

Understanding the Procedure for Porcelain Veneers

We’ve written about the various benefits of porcelain veneers for your teeth, so today we’ll be going in depth regarding the step by step process of having porcelain veneers put in place. In case you missed our other post, porcelain veneers (also sometimes called dental veneers or dental porcelain laminates) are a very thin custom-made covering that goes over the front of your teeth.

Typically made out of porcelain or resin composite materials, porcelain tends to be the material of choice as it better matches the natural light reflecting properties of your teeth while also being more resistant to stains.

When Should you get Porcelain Veneers?

Most often porcelain veneers are typically used to help cover discoloured teeth, either because of other dental procedures like root-canal treatment or because of stains from excessive fluoride and other materials. Porcelain veneers Warrington experts also perform the procedure to help cover teeth that are worn down, chipped or have any other irregularities.  

The Main Steps in the Porcelain Veneers Warrington Procedure

  1. Trimming – The procedure begins with the enamel on the front of your tooth being shaved back for approximately the same thickness as the veneer set to be placed.
  2. Determining the shade – The next step is to look at which shade of veneer will best complement and match your natural tooth colour.
  3. Making a Mould – After trimming and determining the shade, porcelain veneers Warrington then make a mould of your newly shaved teeth in order to create your veneer perfectly to fit.
  4. Temporary Veneer – After this step, some dentists might place a temporary veneer if a large amount of enamel has been shaved away. Typically, a temporary veneer won’t be used unless absolutely necessary.
  5. Pre-Bonding Evaluation – Once your veneer is made you’ll come in to check the fit, shape and colour of your veneer with non-bonding trial paste. After this your porcelain veneers Warrington specialist will make any final changes.
  6. Bonding the Veneer – At this point, your dentist will place an acid etching gel on your tooth upon which they’ll lay down the bonding paste. The veneer is placed and positioned and then a “curing” light is used to help the paste set within a couple of minutes.
  7. Clean-up and Follow-up – After this, the dentist just need to clean off any excess bonding paste and book a follow-up appointment to look at how your gums have responded to the presence of your new veneers.

What Should I know Before Getting Porcelain Veneers?

It’s important to know that the process of getting porcelain veneers isn’t reversible and are usually not repairable if they chip or crack. Be aware that because you’ve had some enamel trimmed off, your teeth might be slightly more sensitive to hot and cold foods or beverages. Lastly, porcelain veneers typically last between seven to fifteen years, after you’ll need to visit porcelain veneers Warrington specialist to get them replaced.

Where Should I get Porcelain Veneers Near Warrington?

If you’re looking for a professional and expert dental service to either place or replace porcelain veneers near the Warrington area, Jones Dental Care have been providing exceptional dental care and porcelain veneers since 2002. Give us a call or fill out our contact form today for more information.